18tWetRoad Sweeper Truck
18tWetRoad Sweeper Truck manufactured by Yutong Heavy Industries.
View Details
All Sanitation Equipment
Sweepers
Sweeper-Scrubbers
Water Sprinklers
Garbage Compactors
Road Cleaners
Dust Suppression
Road Maintenance
Vacuum Sweepers
Guardrail Cleaning
Product Overview
The ytz5041tsld0bev carries 465 of rated payload on the 4.495 t gross mass, with 2.5/2.0 water and hopper capacity sized for continuous municipal rounds. Operators run it through a full shift without a mid-day top-up, and the 63.75 kWh energy pack keeps noise and emissions out of city cores.
4495
Gross Mass (kg)
465
Rated Load
63.75
Battery
2.5/2.0
Capacity
About the YTZ5041TSLD0BEV 4tBattery Electric Road Sweeper Truck
Yutong built the YTZ5041TSLD0BEV for municipal rounds: the rated rated payload, the rated gross mass, the rated of tank and hopper capacity and the high-capacity energy storage keep the unit on the route all day, with the sweeping, washing and suction systems set up for one-pass cleaning.
The working package is one-pass by design: brooms, brush, wash lance and suction are sequenced and controlled from the cab, the hopper seals against dust on load and discharge, and tank and pump components are corrosion-rated for detergent work.
Selecting the YTZ5041TSLD0BEV starts with the sweep schedule: lane width and hours per shift decide tank size, broom package and energy storage, and Yutong configures the unit from those numbers, with spares and support through the global network.
Performance Feature
One-pass pickup geometry: side brooms, main brush and suction are sequenced so the machine cleans a lane in a single pass without re-running.
Tank and hopper sizing that matches the duty cycle: 1.3 of water and 2.5/2.0 hopper keep the route open between refills.
Battery package of 63.75 is sized for a full shift of sweeping, with overnight depot charging the standard pattern.
Rated payload of 465 leaves headroom on the gross mass so the hopper can be filled without derating the machine.
Technical Parameters
| Rated Payload (kg) | 465 |
|---|---|
| Fresh Water Tank (m³) | 1.3 |
| Chassis Brand | Yutong |
| Max. Gross Mass (kg) | 4495 |
| Hopper Total/Effective Volume (m³) | 2.5/2.0 |
| Battery Capacity (kWh) | 63.75 |
Applications
- Municipal road cleaning
- Industrial park sanitation
- Scenic area and campus cleaning
- Tunnel and plaza sweeping
Related Products
18tWetRoad Sweeper Truck
18tWetRoad Sweeper Truck manufactured by Yutong Heavy Industries.
View Details
12tBattery Electric Road Sweeper Truck
12tBattery Electric Road Sweeper Truck manufactured by Yutong Heavy Industries.
View DetailsEngineering & Application Notes
Water is the operating cost that decides a cleaning round, and the YTZ5041TSLD0BEV is plumbed for it: the rated of fresh water capacity sets the stretch between refills, while the hopper absorbs the swept material without a mid-round dump. The the rated runs at the rated rated payload and the high-capacity gross mass with YTZ5041TSLD0BEV of energy storage, and the pump and nozzle package is sized so wash pressure holds while the vehicle is moving, not just at standstill.
Compact BEV lift dump for narrow lanes
The 5041 TSLD class is the small electric lift-dump truck for narrow lanes and old-town districts where the 12 t compactor cannot turn. The body lifts and dumps into the transfer vehicle at the collection point, the electric drive handles the short round and frequent stops, and the small carrier keeps axle loads inside the light-load limits of heritage streets. Operators on this duty value the turning circle as much as the payload.
Frequently Asked Questions
What are the main technical specifications of the YTZ5041TSLD0BEV Road Sweeper?
The full rated specifications are listed in the technical parameters table above, including dimensions, mass, powertrain and capacity figures for the standard configuration.
What applications is the YTZ5041TSLD0BEV Road Sweeper designed for?
The YTZ5041TSLD0BEV Road Sweeper is engineered for the applications listed in the Applications section, and can be customised to match specific job-site conditions and regulatory requirements.
Can the configuration be customised?
Yes. Yutong offers optional bodies, powertrain options, safety packages and auxiliary equipment. Tell us your requirements and our engineering team will propose a tailored configuration.
What is the lead time and how do I get a quote?
Standard models ship within a few weeks; custom configurations depend on scope. Use the Inquire Now button or email market@yutonggroup.com for pricing, lead time and documentation.
Do you export and provide after-sales support?
Yutong exports to over 60 countries and provides spare parts, operator training and factory technical support through its international service network.
How does the warranty work?
Every machine is covered by Yutong's standard warranty; extended warranty and service packages are available on request. Terms are confirmed in the sales contract.