TL210H Wheel Bulldozer
High-speed wheel dozer for grading, backfilling and site preparation.
View DetailsAbout Wheel Bulldozers
Yutong wheel bulldozers are high-speed rubber-tyred dozers built for spreading, grading and pushing fill on stable, engineered ground. The TL210H is the versatile general-purpose model for site prep, backfilling and road sub-base work, while the heavier TL240H (18.8-ton operating weight) takes on tougher dozing and grading where extra blade push matters. Unlike a crawler dozer, a wheel dozer travels quickly between push areas on graded fill, so it spreads and levels engineered fill faster on roads, railways, airport aprons and dam embankments. Pair a wheel bulldozer with a Yutong wheel loader for the standard earthworks cycle: the loader stockpiles and feeds, the dozer spreads and compaction layer follows. ROPS/FOPS cabs and turbocharged diesel engines meet export operator-protection and emission expectations.
Wheel Dozer vs Track Dozer: Choosing the Right Tool
Track dozers win on traction and dozing power in soft or steep ground; wheel dozers win where the job needs speed, mobility and low ground pressure on firm surfaces. A wheel bulldozer travels between sites at road speed without a low-boy trailer, changes tools quickly, and on compacted surfaces moves material 20–30% faster per machine hour than an equivalent track dozer — at noticeably lower undercarriage cost.
Where Wheel Dozers Earn Their Operating Cost
- Site levelling and finishing: final trim tolerance on compacted subgrades, where blade control and travel speed decide productivity.
- Road construction and maintenance: spreading base material, backfilling trenches and maintaining haul roads between mining fleets.
- Utility and municipal work: snow removal, demolition spoil spreading, stockpile management at crushers and batching plants.
- Sand and aggregate yards: where track machines bog down, a wheel dozer keeps cycling all shift.
Specification Points That Matter
- Blade capacity and width: match to the material you spread most — wide blades suit finishing, deep blades suit production dozing.
- Engine power and torque rise: a wheel dozer must hold blade load without downshifting; check rated power at the flywheel and at the blade.
- Articulation and oscillation: full articulation keeps the blade line while the rear axle tracks through ruts.
- Tyre specification: L3/L4 tread patterns change traction and wear on compacted versus loose surfaces.
Yutong wheel bulldozers are built for operators who run mixed fleets: the same undercarriage family as our wheel loaders, common filters and service points, and a blade geometry developed on high-hour sand and aggregate duty in China and the Middle East.
Wheel Bulldozers Range
